A leaking tap, a bathroom to renovate or a roof to repair: finding a tradesperson seems simple until you have to choose between several adverts and quotes that are difficult to compare. Price matters, but so do the detail of the proposed work, the identity of the business and the payment terms.
The most useful approach is to proceed in stages: define your needs, check the professional, compare equivalent offers and record decisions in writing. Here is how to proceed in Belgium, whether for a small job or a larger project.
Publication date: 2 November 2026. Information and links checked on 19 October 2026.
1. Define exactly what you want done
Before asking for a price, prepare a single description to send to each business. A request such as “renovate the bathroom” leaves plenty of room for interpretation. Instead, specify what needs to be dismantled, kept, replaced and finished.
- Specify the municipality, the type of home and the rooms concerned.
- Attach general photos and close-up views of the problem.
- Provide any known dimensions and flag any uncertainties.
- Explain any constraints: floor level, lift, parking, garden access, occupied property.
- Specify who will supply the equipment and who will remove the waste.
- State your preferred timeframe, distinguishing a genuine emergency from a scheduling preference.
For water ingress, for example, first ask for the cause to be investigated. Painting over a stain without understanding where the water comes from may simply postpone the problem. For a complex project, suggest a site visit before the final quote.
If you are a tenant, clarify with the landlord who will commission and pay for the work before committing to it. In a jointly owned building, check with the property manager whether the project affects a communal area. For a major alteration, ask the municipality and, if necessary, an architect which approvals, permits and inspections are required in your situation.
2. Where can you look for a tradesperson in Belgium?
Start with people who have had comparable work done: neighbours, colleagues, friends and family, or the property manager. A recommendation becomes more useful when you can ask specific questions: was the work completed, did the final invoice match the quote, and were defects corrected?
Broaden your search with local businesses, trade directories and classified adverts. To find more options, you can also visit OnLa.be and search for the trade you need along with your municipality, for example “painter”, “plumber” or “renovation”. An advert is an initial point of contact; then ask for a quote and carry out the same checks as you would for a personal recommendation.
If you prefer to communicate in a particular language, ask at the first contact whether the tradesperson can explain the quote and decisions in that language. This helps avoid misunderstandings about materials, finishes or additional charges.
3. Check the business’s identity
Ask for the legal name, address and enterprise number. Then consult CBE Public Search, the official search tool for the Crossroads Bank for Enterprises.
Compare the details with those in the advert, quote and invoice. FPS Economy explains which data can be consulted free of charge, including the registered identity, activities and establishments. A trading name that differs from the legal name may have an explanation; an unexplained difference should be clarified before payment.
Registration with the CBE identifies a professional; it does not certify the quality of their work. So do not settle for a number copied into an advert. Also ask a simple question: “Which business will sign the contract, send the invoice and be responsible for follow-up?”
Ask who will actually work in your home: the tradesperson you met, their employees or a subcontractor. Keep a designated contact for decisions and acceptance of the completed work.
4. Examine references rather than relying solely on star ratings
Ask for two or three recent examples of similar work. A well-executed painting job tells you little about the ability to fix a roof leak. With the people concerned agreeing, contact a former customer or ask to see a completed project.
The FPS Economy recommends checking references. It also distinguishes contractor approval for public procurement: a small business’s absence from this list is not, on its own, a reason to rule it out for private work.
When using online reviews, look for concrete details rather than a perfect rating: the type of work, whether commitments were met and how problems were resolved. Compare several sources and look at how the business responds to criticism. Very similar reviews or a string of vague praise warrant further checks.
5. Ask for a written quote with sufficient detail
For services covered by the regulations on non-standard services, the professional must provide a quote if the consumer requests one and the professional agrees to provide the service. The FPS Economy specifies the minimum information a quote must contain. Preparing it may involve a fee, provided you are clearly informed in advance.
Beyond these minimum requirements, ask for a document that genuinely helps you understand what you are buying:
- the identities of the parties and the site address;
- surface areas, quantities, materials, product references and finishes;
- surface preparation and any preliminary repairs;
- the price, VAT and total amount payable;
- protection, travel, cleaning and waste removal;
- items excluded or still to be priced;
- the planned schedule and the conditions that could change it;
- the payment stages and the procedure for additional charges.
Ask whether the price is fixed, calculated per unit or charged on a time-and-materials basis. For time-and-materials work, have the hourly rate, how hours are recorded, materials and a spending threshold above which further written authorisation will be required specified.
6. Compare several quotes on the same basis
If time allows, request several quotes based on the same description. The cheapest may be a sensible choice, but only once you understand the differences in what is included.
| Point to compare | Useful question | Risk to avoid |
|---|---|---|
| Preparation | Are old coverings and underlying surfaces dealt with? | A new finish on a deteriorated base. |
| Materials | Which product references and quantities are planned? | Comparing products of different quality. |
| Associated work | Who fills holes, makes connections and completes the finishing work? | Work presented as finished but still incomplete. |
| Logistics | Are access, protection, waste removal and cleaning included? | Charges discovered after work has begun. |
| Timeframes | What duration and stages are planned? | Availability promised without a clear schedule. |
| Payment | What work does each payment cover? | Paying too far ahead of actual progress. |
Purely illustrative example: a quote of 4 000 euros including wall preparation and waste removal may offer better value than a quote of 3 500 euros that excludes them. These amounts illustrate the method; they are not market prices.
Also check the VAT. The reduced rate of 6% may apply to certain work on a home that meets, among other requirements, the condition of being at least ten years old, but it does not automatically apply to every project. Consult the FPS Finance conditions and ask why each rate appears on your quotation. Materials purchased directly by a private individual do not necessarily receive the same treatment as materials supplied and installed by the contractor.
7. Clarify insurance and guarantees
Ask which insurance policies cover the work and any damage to your home or a neighbour’s property. For a major project, have your insurer or architect review the insurance certificates: the insured activity, dates and exclusions matter just as much as the insurer’s name.
In Belgium, ten-year civil liability insurance is mandatory for certain residential construction projects that legally require an architect and for which the permit was issued after 1 July 2018. Its scope includes defects affecting structural strength, stability and certain watertightness problems in the enclosed building shell that put these at risk.
This does not mean that every minor repair is insured against all defects for ten years. Where the requirement applies, the certificate must be provided before work begins. The conditions are detailed on the FPS Economy page on ten-year liability insurance.
Also distinguish between an appliance warranty, any commercial guarantee offered and liability for installation. Ask whom you should contact if a part or its installation causes a problem.
8. Arrange payments and changes
Before paying a deposit, ask what it covers: ordering specific materials, booking the work or another defined stage. Do not accept a percentage presented as a universal rule. The amount should be discussed in light of the project and the commitments made.
The FPS Economy points out that an order form containing the required information must be provided when a deposit is paid for a service to be performed later. Keep it with the general terms and conditions and proof of payment.
To keep a clear record, opt for a traceable payment with the quotation or invoice reference. Have any change of bank details confirmed through another established channel, such as the phone number used before you received the message. A request to change an IBAN warrants verification, even when it arrives in an apparently routine exchange.
Plan payments linked to observable milestones. If a difficulty arises during the work, request a written description of the solution, its price and its effect on the schedule before approving the next steps. Also record any changes you request yourself: moving a socket or changing a material may come at a cost.
9. For emergency repairs, obtain the price before work begins
An emergency leaves less time to compare options, but a few questions remain essential: what is the call-out charge, what rate applies at this time, is there a diagnostic fee if you decline the repair, and which parts are included? Ask for written confirmation before the professional sets out or, at the latest, before work begins.
The FPS Economy warns about poor practices by repair services, particularly misleading headline prices and poorly explained costs. A top position in search results is no proof of a repair professional’s quality. No document should be signed blank or without understanding its contents.
If additional work is proposed, have its cost specified before it is carried out. If threats are used to pressure you into paying, contact the police. To save time when the next problem arises, prepare a shortlist now of professionals whose contact details you have already checked.
10. Read the terms before signing
Ask for a copy of the quotation, its attachments and the general terms and conditions. Check the provisions on delays, price revisions, cancellation, materials and acceptance of the work. Have any passages you do not understand explained before agreeing.
For a contract signed at home that falls under off-premises selling rules, there is generally a right of withdrawal of fourteen calendar days, subject to exceptions and specific rules. This right should not be assumed to apply to every contract for works. Consult the official guidance on off-premises selling, particularly if work needs to begin quickly, and have your situation clarified before signing.
11. Monitor the work and check it before acceptance
Agree on a frequency of contact suited to the work. For a project lasting several weeks, regular updates help resolve questions before they hold up the team. Keep a record of decisions in written correspondence shared with your contact.
Take photos of stages that will later be covered up, with any necessary consent from the people present. File the material references and technical documents. At the end, inspect the work in daylight, test the equipment under normal conditions and check the agreed finishes.
Record defects or missing items precisely and ask for a schedule for correcting them. For an acceptance procedure with significant legal implications, have the architect or an independent expert accompany you. Do not sign an unconditional acceptance if you identify problems you want corrected.
12. What should you do about defective work, delays or a disputed invoice?
- Describe the facts in writing. Identify the quotation concerned, the issues involved and the solution requested. Attach photos and propose a response deadline appropriate to the situation.
- Preserve the evidence. Keep the documents and the history of your correspondence. Before another company carries out remedial work, have the problem formally documented if necessary; in an emergency, document the measures taken to limit the damage.
- Seek appropriate advice before making a major decision. Terminating a contract or withholding payment can have consequences. Contact your legal expenses insurer, a lawyer or an advice service to assess your case.
- Seek an amicable solution. After first contacting the company in writing, the Consumer Mediation Service can assess where your request should be directed and whether it is admissible.
- For a technical construction dispute, consider conciliation. The Construction Conciliation Commission acts subject to its conditions, including a contractual clause or the parties’ agreement. Check its procedure and fees before committing.
- Report a suspected illegal practice. ConsumerConnect allows you to report infringements and find guidance. A report to the Economic Inspectorate does not guarantee reimbursement of your individual bill.
A simple message to request a comparable quotation
Hello, I am looking for a professional to carry out the work described below in my home. Could you specify your availability, whether a site visit is needed and any charge for the quotation? I would like a quotation detailing the services, materials, exclusions, total including VAT, schedule and payment stages. Please also provide your legal name, business registration number and the insurance relevant to this work. Any additional work must be priced and approved in writing before it is carried out.
Adapt this message to your project and add your photos and any access constraints. To begin your search, the listings on OnLa can complement your local contacts. Then take the time to compare the responses: a professional who clearly explains their quotation gives you a firmer basis for making a decision.




Discussion
Sign in on the main website to leave a comment.
No comments yet. Start the conversation.